KM-92 series hose crimping machine of our company is in the base of the overseas advanced technology, selection of special excellent strength and toughness properties of the material, it is a type of using of advanced processing technology R&D. It uses imported low noise high pressure gear pump makes the equipment of hydraulic system are more durable and reliable. And the CNC machining center and the process of heat treatment makes the working surface finish to reach the foreign products at the same lever. It improves the mechanical transmission efficiency greatly. 2 inch 6 layers of steel wire reinforced rubber hose withhold work can use this model (KM-92C) to easily complete.
Techinical Datas Of KM-92C Hydraulic Hose Crimping Machine (Button Type)
| Model NO. |
KM-92C(button type) |
| Crimper Rage |
1/8 ich -2 inch IV |
| Crimp Force |
340 T |
| Standard voltage&motor |
380V/4kW |
| Optional voltage&motor |
220V/2.2kW |
| Opening without dies |
φ160mm |
| Opening |
min 38mm |
| Open Time |
within 1.5S |
| Close Time |
within 8S |
| Displacement of plunger pump |
14.5 L/min |
| Hydraulic Oil |
Winter: YB-N32; Summer: YB-N46 |
| No.of standard die sets |
16 sets |
| Systematic Pressure |
30Mpa |
Advantages Of KM-92C Hydraulic Hose Crimping Machine (Button Type)
1). Two-grade speed and no axial displacement;
2). Elarge opening, suitable for many kinds of elbow fitting;
3). Suitable for quick change tool;
4). Equipped with protection adapter which protect dies against the failure installation;
5). Suitable for 4 inch industrial hose.
Applications Of KM-92C Hydraulic Hose Crimping Machine (Button Type)
1).Suitable for high precision pressing of low and high pressure hose diameter, starting from 1/8 inch to 2 inch internal hose pipe.
2).Used rubber hose to transmit hydraulic pressure as there working power.
3).Used in Building Construction, Petroleum Industry, Chemical Industry, Car and motor Industry.
Hydraulic Hose Crimping Machine why not choose Kangmai?
1). Kangmai hose crimper has approved CE & ISO and audited by SGS.
2). The fitting and hoses crimped by kangmai machine never leakage the oil and never broken. The reason are like below:
(a)The machine head process by CNC machine, roundness and taper is within 0.1mm.
(b)The machine die base and dies adopt special die steel and process by advances craft,the hardness is above 55HRC. The die hardness is enough so that the die life is very long and easy to crimping high pressure hydraulic hose, such as 4SP even 6SP.
(c)The technical of machine head is forging or cast. Casting is cheap but has small hole on the machine head. The piston will divide from casting machine head.
Audited Supplier 
){kind=link}
){kind=link}