Technical Datas Of Superthin Hydraulic Hose Crimping Machine KM-81A-51
| Model NO. |
KM-81A-51 |
| Crimper Rage |
1/8 inch -2 inch IV |
| Standard voltage&motor |
380V/4kW-3phase |
| Crimping Force |
420 T |
| Opening without dies |
φ155mm |
| Opening |
above 60mm |
| Open Time |
within 3S |
| Close Time |
within 9S |
| Hydraulic Oil |
Winter: YB-N32; Summer: YB-N46 |
| No.of standard die sets |
10 sets |
| Quick chang tool + die shelf |
available |
| Systematic Pressure |
30Mpa |
Please note: the voltage and die sets can be customized according to your requirements
Advantages Of KM-81A-51 Superthin Hydraulic Hose Crimping Machine
1). Ultra thin body with large opening, easy for elbow to go through;
2). Operating system upgrade easy and intelligence;
3). It is suitable for non-standard fitting;
4). With quick change tool.
5). Added die base resin gasket to protect the machine from debris dropping.
6). It is a good choice for large production with high efficiency
Applications Of KM-81A-51 Superthin Hydraulic HoseCrimping Machine
1).SAE 100 R 13 2" 4-LAYER steel wire hose.
2).EN856 2" 4SP hose.
3).EN856 2" 4SH hose.
4).Big flange and special elbow fittings and tube
Hydraulic Hose Crimping Machine why not choose Kangmai?
1). Kangmai hose crimper has approved
CE & ISO and audited by SGS.
2). The fitting and hoses crimped by kangmai machine never leakage the oil and never broken. The reason are like below:
(a)The machine head process by CNC machine, roundness and taper is within 0.1mm.
(b)The machine die base and dies adopt special die steel and process by advances craft,the hardness is above 55HRC. The die hardness is enough so that the die life is very long and easy to crimp high pressure hydraulic hose, such as 4SP even 6SP.
(c)The technical of machine head is forging not cast. Casting is cheap but has small hole on the machine head. The piston will divide from casting machine head.
Audited Supplier 
){kind=link}
){kind=link}