2 Inch Superthin Hydraulic Hose Crimping Machine Km-81b

• Customization: Available
• Certification: CE, ISO
• Condition: New
• Model NO.: KM-81B-51
• Customized: Customized
• Automatic Grade: Automatic
• Structure: Horizontal
• Product Name: Superthin Hydraulic Hose Crimping Machine
• Crimp Rage: 1/8 Inch to 2 Inch
• Machine Max Opening: 157mm
• Die Material: Special Steel
• Machine Valves: From Taiwan
• Crimping Force: 420 Ton
• Volume(L-W-H): 800*920*1520(mm)
• Transport Package: Standard Export Plywood Case
• Specification: Approved CE and ISO
• Trademark: Kangmai
• Origin: Handan, China
• HS Code: 8462919000
• Production Capacity: 2000 Sets/Year

Product Description

Technical Datas Of Superthin Hydraulic Hose Crimping Machine KM-81B-51

Model NO.	KM-81B
Crimper Rage	1/8 inch -2 inch IV
Standard voltage&motor	380V/5.5kW
Crimping Force	420 T
Opening without dies	φ157mm
Opening	above 62mm
Open Time	within 3S
Close Time	within 9S
Hydraulic Oil	Winter: YB-N32; Summer: YB-N46
No.of standard die sets	15 sets
Systematic Pressure	30Mpa

Advantages Of KM-81B Hydraulic Hose Crimping Machine
1). Ultra thin body with large opening, suitable for hose with elbow;
2). Operating system upgrade easy and intelligence;
3). It is suitable for non-standard fitting;
4). With quick change tool.
5). Added die base resin gasket to protect the machine from debris dropping.
6). It is a good choice for large production with high efficiency

Applications Of KM-81B Hydraulic HoseCrimping Machine
1).SAE 100 R 13 2" 4-LAYER steel wire hose.
2).EN856 2" 4SP hose.
3).EN856 2" 4SH hose.
4).Big flange and special elbow fittings and tube

Hydraulic Hose Crimping Machine why not choose Kangmai?
1). Kangmai hose crimper has approved CE & ISO and audited by SGS.

2). The fitting and hoses crimped by kangmai machine never leakage the oil and never broken. The reason are like below:
  (a)The machine head process by CNC machine, roundness and taper is within 0.1mm.
  (b)The machine die base and dies adopt special die steel and process by advances craft,the hardness is above 55HRC. The die hardness is enough so that the die life is very long and easy to crimp high pressure hydraulic hose, such as 4SP even 6SP.
  (c)The technical of machine head is forging not cast. Casting is cheap but has small hole on the machine head. The piston will divide from casting machine head.