Manual Hydraulic Hose Cut off Saw up to 2"

• Customization: Available
• Certification: CE, ISO
• Condition: New
• Customized: Customized
• Automatic Grade: Automatic
• Structure: Horizontal
• Product Name: Hose Cutting Machine
• Crimper Range: 1/8 Inch - 2 Inch
• Max Crimp O.D.: 80mm
• Cutting Blade: From Europe
• Motor: Aluminum Shell Motor
• Transport Package: Standard Export Plywood Case
• Specification: Approved CE and ISO
• Trademark: Kangmai
• Origin: Handan, China
• HS Code: 8477800000
• Production Capacity: 2000 Sets/Year

Product Description

KM-350B hose cutting machine is the hose crimping machine kit products, the structure of the machine is novel in design,it use a new type of motor with aluminum shell to drive the blade, greatly reduce the hose vibration in the cutting process, so it work more safe and reliable, with today's most advanced special high-pressure hose blade (European imports blade), this machine has long service life, cutting speed, no pungent odor, no debris, sand, and cutting hose with cooling and atomizing device, that reduce the wear but raise the blade using life, and equip with a dust collecting unit, clean and environment protection.

Technical Datas Of  Hose Cutting Machine KM-S350B

Crimp ranger:	1/8"-2" (6mm-51mm)IV
Standard voltage&motor:	380V/3kW
Max Crimp	φ80mm
Range	125mm
Speed	2900r/min
Cutting Blade O.D.	φ350mm
Cutting Blade I.D.	φ50mm
Cutting Blade Thickness	3mm
Noise level	Within 65dB
Weight	95Kg
L*W*H	700*700*600 (mm)

Advantages Of Hose Cutting Machine KM-S350B
 1). Imported cutting blade, high intension and long lifetime, and possessing the function of compensating wearing of cutting blade;

 2). Hose cutting speed can be stepless regulated;
 3). Extracting fume and smoke, environmental protection and healthy.
 4). Special motor, and cutting blade has good stability.

Hydraulic Crimping Machine why not choose Kangmai?
1).Kangmai crimping machine has approved CE&ISO PATENT, and audited by SGS;

2).The fittings and hoses crimper by Kangmai never leakage oil and never broken. The reason are like below:
  a)The machine head process by CNC machine, roundness and taper is within 0.1mm;
  b)The machine die base and dies adopt special die steel and process by advanced craft, the hardness is above 55 HRC. The die hardness is enough so that the die life is very long and easy to crimping high pressure hydraulic hose, 4SP even 6SP.
  c)The technical of machine head is forging not casting. Casting is cheap but has small hole on the machine head. The piston will divide from casting machine head.