KM-83A hose crimping machine is the best choice for crimping hydraulic hose with double flange fitting.Even up to 2inch hydraulic hose with double flange fittings.This side opening crimping machine is suitable for large production of hydraulic hose in hydraulic transmission. As per speical side open design, high presion and fast.
I. KM-83A techincal data:
(Touch screen type )
II.Tounch sreen Crimping machine KM-83A introudtion
|For hydraulic hose||min 1/4inch max 2inch 4SP|
min 4mm max 51mm
|Voltage & Power||380V-50HZ-3PH|
|Pump||Piston pump |
|Weight without oil||1400KG|
|Electric limit switch||has|
|Electric control with touch screen||has|
1.A. Tool change wizard and tool change alarmIII.Hose crimping machine KM-83A dies
2.B. Data storage for crimping parameters and die sets
4.D. Diameter crimping;diameter,retraction,correction, delay
5.E. Manual/automatic mode/foot pedal
6.F. User-friendly navigation
7.G. Die position displayed
8.H. Can crimp both by pressure and diameter
9.I. Ideal when parts with large tolerance or sensitive materials need to be crimped.
10.J. Multi-step crimping
Note: Die bore&Length can customized as your hydraulic fitting & ferrule size.
|Die information of KM-83A|
|Hose I.D.||Die bore||Die length ||Ferrule length|
|3/16"(5mm)||11mm||65mm||less than 65mm|
|1/4"(6mm)||15mm||65mm||less than 65mm|
|5/16"(8mm)||18mm||65mm||less than 65mm|
|3/8"(10mm)||20mm||65mm||less than 65mm|
|1/2"(13mm)||23mm||65mm||less than 65mm|
|5/8"(16mm)||26mm||65mm||less than 65mm|
|3/4"(19mm)||29mm||65mm||less than 65mm|
|1"(25mm)||37mm||65mm||less than 65mm|
|1 1/4"(32mm)||46mm||78mm||less than 78mm|
|1 1/2"(38mm)||51mm||78mm||less than 78mm|
|2"(51mm)||63mm||78mm||less than 78mm|
|2 1/2"(64mm)||78mm||78mm||less than 78mm|
|NOTE:We can make speical dies as your HOSE AND FERRULE SIZE. |
IV.Hose crimping machine KM-83A applition:2. Suitable for high precision pressing of low and high pressure hose diameter ,starting from 1/4" to 2" internal hose pipe. 3
1.best choice for crimping hydraulic hose with double flange fitting.
.Used rubber hose to transmit hydraulic pressure as there working power.
4. used in Building Construction, Petroleum Industry, Chemical Industry, Car and Motor Industry.Hose crimping machine why not choose kangmai ? 1. kangmai hose crimping machine CE& ISO PATENT Approved and SGS Audited.2. The fitting and hoses crimped by kangmai machine never leakage the oil and never broken. The reason like below:(a)The machine head process by CNC machine,roundness and taper is within 0.1mm.(b)The machine die base and dies adopt special die steel and process by advanced craft, the hardness is above 55 HRC. The die hardness is enough so that the die life is very long and easy to crimping high pressure hydraulic hose, 4SP even 6SP.(c) The technical of machine head is forging or casting. Casting is cheap but has small hole on machine head. The piston will divide from casting machine head.
3. Strictly testing and inspetion. (A) for raw material, we will check again by our inspector as per international standard. Only the raw material reach to international standard and allow enter kangmai facotry. (B) for hydraulic and eletrical parts, such as valve, pump, motor and so on, we use famous brand both from China and abroad.However, we will check again when these parts enter our facotry. (C) before the hose crimping machine enter our warehouse, the inspector check the machine roundess, taper, opening, speed, noise, apprance and so on. Only each parts is up to standard of ISO, CE standard, the machine can enter the warehouse. (D) when the machine package, the inspector the dies, the package and other parts of clients requriment. Everything is ok, the inspector signed and machine allow to go out the facotry.
4.KANGMAI HYDRAULIC Pay attention to package so that the machine can reach to client safely:
5. KANGMAI HYDRAULIC PAYTATION SERVICE AND TECHINCAL SUPPORT: (A) tell you, my dear clients- the route of vessal. (B) take the photo of machine production condition and package condition to you-my clients.(C) Apply free container yard of your port, my dear client give you engouh time to clear your country customer. (D) when you get our hose crimping machine, I will tell you again how to operation the machine and how to maintaince the hose crimping machine.(E) pay a return visit after you use our machine 2-3 hours. Offer some suggestion again about maintaince machine so that you can use kangmai machine for a long time.(F) technical support: (1)24 hour technical support available(2)We can ask our engineer to your mentioned address if there is any need.