Hydraulic crimping machine KM-91C-6 is best choice for crimping 1/8" to 2inch 6SP hydraulic hose based on max opening(125mm), high force(6400KN) and steady quality.
1.Techincal data of KM-91C-6:
| Crimp range |
4mm-91mm |
| For hydraulic hose |
2inch 4SP/ 64mm 4SP |
| Max opening without dies |
125mm |
| Opening |
28mm |
| Force |
640T |
| Cycle time |
7s |
| Voltage & Power |
380V-50HZ-3PH |
| Optional voltage |
220V,240V,440V |
| Pump |
Piston pump 14.5min/L |
| Dies sets |
10 |
| System pressure |
31.5Mpa |
| Machine size |
720*530*730mm |
| Weight without oil |
310KG |
| Shelf+quick change |
NO |
| Electric limit switch |
has |
| Electric control with touch screen |
NO |
HOSE CRIMPING MACHINE KM-91C-6 CRIMPED SAMPLE:
Hose crimping machine KM-91C-6applition:
1. Suitable for high precision pressing of low and high pressure hose diameter ,starting from 1/4" to 2" internal hose pipe.
2.
Used rubber hose to transmit hydraulic pressure as there working power.
3.
used in Building Construction, Petroleum Industry, Chemical Industry, Car and Motor Industry.
Hose crimping machine why not choose kangmai ?
1. kangmai hose crimping machine CE& ISO PATENT Approved and SGS Audited.
2. The fitting and hoses crimped by kangmai machine never leakage the oil and never broken. The reason like below:
(a)The machine head process by CNC machine,roundness and taper is within 0.1mm.
(b)The machine die base and dies adopt special die steel and process by advanced craft, the hardness is above 55 HRC. The die hardness is enough so that the die life is very long and easy to crimping high pressure hydraulic hose, 4SP even 6SP.
(c) The technical of machine head is forging or casting. Casting is cheap but has small hole on machine head. The piston will divide from casting machine head.
3. Strictly testing and inspetion.
(A) for raw material, we will check again by our inspector as per international standard. Only the raw material reach to international standard and allow enter kangmai facotry.
(B) for hydraulic and eletrical parts, such as valve, pump, motor and so on, we use famous brand both from China and abroad.However, we will check again when these parts enter our facotry.
(C) before the hose crimping machine enter our warehouse, the inspector check the machine roundess, taper, opening, speed, noise, apprance and so on. Only each parts is up to standard of ISO, CE standard, the machine can enter the warehouse.
(D) when the machine package, the inspector the dies, the package and other parts of clients requriment. Everything is ok, the inspector signed and machine allow to go out the facotry.
4.KANGMAI HYDRAULIC Pay attention to package so that machine reach to clients safely:
Audited Supplier 
){kind=link}
){kind=link}